![]() In this scenario you are recording audio, not midi. This is perhaps not as good as using midi because you're somewhat limited in what drum sounds you can use (ie can really only use those provided on the drum kit) but you can still add effects to it after. another approach which does not use midi, but still allows you to edit each drum individually.Ģ. My problem is that it appears some of the constraints with logic are preventing my high hat from ringing properly. ![]() The tutorial has a much better explanation and you can watch what's happening. Once you have that set up, you can then choose in your track which auxiliary channel to use. For Midi - there is a tutorial on youtube that explains how to assign a specific note on the midi piano roll view (which is triggered by the drum) to a specific channel. What I've found out is the TD-4 will only let you push midi sounds out to 1 channel, so it cannot separate from the kit.ġ. I investigated this quite a bit in other rooms/people and am posting the answer in case anyone else is looking for the same topic. Any thoughts on that would be helpful as well. The other symbols are ringing fine though, so I'm not sure why the highhat is not doing the same. Its making it a short, techno type of strike that only lasts for a split second. when I hit the highhat (either through midi or audio track) I find that its not letting the tone ring out. I saw some posts that mention I need to set the vdrum to send each pad to a specific channel, but I couldn't quite get that to do anything.Īlso, a side issue I'm having. I have had success connecting the L/R channels of the vdrum to the L/R audio track inputs in the saffire, but I want to get the midi working so I have more control over each drum. I am connecting my midi-out from the vdrums directly to the saffire pro midi in. For example, if I hit the high hat and snare at the same time only one comes through. So far, when I try to play the drums I get the signals to record but it won't seem to let me record more than one pad at the same time. I cannot figure out how to get my roland TD-4 to connect to logic express and play each drum on a different track. I am using logic express 9 and a saffire pro 14 to connect to my imac. I've been using garageband to do some simple guitar tracks for the past year or two and recently decided to upgrade and get more involved in my recording. This allows you to hear your audio recording back through the TD-1.Hi everyone, let me start by saying I am a real novice at this recording stuff. ![]() ![]() Using another insert cable like the one in step 1, connect an audio lead from the audio output of the audio interface to the MIX IN of the TD-1.Arm the track and record a section of playing.In the recording software, select whichever inputs your TD-1 is connected to, eg: 1 / 2.Create a single stereo audio track in your music software.Connect the TD-1 via the LINE OUT connector to your audio interface using a 3.5mm stereo to 2x mono jack insert cable 1/8″ 3.5mm Audio Insert Cable for recording the TD-1.Once you have an audio interface, follow these steps to capture the sound of the kit. See the Roland range of audio interfaces here. When recording the Roland TD-1 as audio, grab an audio interface.Īudio interfaces range from 2 channels through to multiple channels for recording more instruments. Playback the MIDI that will play your performance, using the drum plug-in sounds.Connect an audio lead from the audio output of the computer to the MIX IN of the TD-1 to hear the sounds from the software. ![]() Create a MIDI track in your music software and choose a software drum plug-in.Connect the TD-1 via a standard USB lead to your MAC or PC.Follow these steps if you want to record and edit the actual notes of your performance. ![]()
0 Comments
Leave a Reply. |