![]() Used to replace damaged or missing mortise locks in patio sliding doors.*Selection Tip: To ensure the perfect match is selected prior to purchasing, the lock will need to be removed to compare the following 4 features (besides the width of housing): 1) The distance of the mounting holes measured from center to center, 2) The faceplate ends rounded or square, 3) The position of the slotted keyway when in the locked position at 45 degree angle or vertical, and 4) The shape of the housing corners at the rear square or slanted. This mortise lock is used by W and F patio door manufacturers and a variety of other manufacturers. from center to center, and the rear housing corners are square. ![]() The mounting hole centers of this lock measure 3-11/16 in. It features an adjustable, spring-loaded hook latch projection and works with mortise style, surface-mounted patio door handle sets with vertical keyway positions when in the locked position. square spindle drive accepts a max.This mortise lock is constructed of steel components with rounded faceplate ends. This mortise caselock is used indoors with old style mortise lock sets. ![]() *Installation Tip #3: See manufacturer’s How-To Video which shows how to reverse the handing of the door latch. *Installation tip #2: Apply a small amount of Loctite ThreadLocker 271® to the set screw threads in the event they are loosening – Loctite® purchased separately. Products like Fix-It-All® and Bondo Body Filler® have worked well for some, but care must be used to avoid damaging any prefinished door surfaces during application and finishing. (approximate size) holes must first be filled with a hardening filler, to then be able to receive the rosette fasteners. *Installation tip #1: Because the fasteners of the rosettes (purchased separately) require a solid surface to mount to, the large 2-1/8 in. Note #2: This item cannot be used on pre-bored doors that have large, newer style door knob holes without first prepping them to receive this hardware. opening, but it will ONLY accommodate 1/4 in. Each bottom guide mounts with 2 fasteners and they are designed to accommodate. This sliding closet door bottom guide is constructed of plastic and comes white in color. Prime-Line 2-Count 1.125-in Sliding Closet Door Floor Guide. *Note #1: The square drive on this latch has a 9/32 in. This patio sliding door mortise lock by Prime-Line Products is constructed with a corrosion-resistant, stainless steel housing and stainless steel faceplate. Mortise Lock, 3-11/16 In., Steel, 45 Degree Keyway, Round Faceplate (single Pack) Model E 2014. The latch includes a latch and deadbolt strike with fasteners, but it does NOT include any of the following components and they must be purchased separately: The door knobs, square spindle, spare keys and trim plates. This mortise lock assembly is used with antique and vintage door hardware and it features a 2-3/8 in. It ships handed (to close in a certain direction), but the latch can be reversed for opposite swinging doors. ![]() ![]() It also fits doors using W&F manufactured handles. This mortise caselock is designed for indoor use only, and it functions with the use of a spring-loaded square drive spindle at a maximum width and height of 1/4 in. Product Details This is a mortise lock that has an adjustable, spring-loaded hook latch projection for surface-mounted sliding patio doors constructed of wood, aluminum and vinyl with handle sets with vertical keyway position when in the locked position. These mortise lock assemblies are constructed of steel and diecast components and come in a brass plated finish. ![]()
0 Comments
Leave a Reply. |